Description
Upgrade your home with this 16A WiFi Smart Socket. this smart plug gives you complete control from anywhere via eWeLink App, RF2.4G remote, or voice commands. Perfect for daily routines, and peace of mind.
✅Product parameters:
✅Wifi smart socket parameters：
Working voltage: AC100~240V, 50/60Hz
Maximum current: 16A
Remote control frequency: 2.4GHz
support App: Only support eWeLink APP
Terminal platform: Android/IOS
Wifi: IEEE802.11 b/g/n 2.4G
✅Remote control parameters:
RF frequency: 2.4GHz
Size: 118 x 40 x 10mm
Model of battery used: 2 AAA battery (Battery included)
The "All ON" button can open 4 sockets with one click, and the "All OFF" buttoncan close 4 sockets with one click
✅Matching method of remote control and socket:
1 remote control+1 socket
1 remote control+2 sockets
1 remote control+3 sockets
1 remote control+4 sockets
2 remote controls+1 socket
3 remote controls+1 socket
4 remote controls+1 socket
1 socket can be paired with up to 5 numeric buttons
✅✅APP connection:
1. Turn on Bluetooth and 2.4G on your phone wifi
2. Press and hold the socket button for more than 5 seconds, the indicator light will flash quickly twice and remain on once to enter the distribution mode,
3. Open the app, click on the bottom, select "Bluetooth network distribution", click "Next", and the app will automatically scan for devices.
4. Click on the scanned device, and then select the device connected to the phone WiFi Confirm that the relevant information is correct, click 'Save', and wait for the device to be connected.
5. The device has been successfully added. You can modify the device name and click 'Add Complete'.
✅✅If the indicator light flashes slowly, you need to select compatibility mode to connect to the APP。
Alternatively, press and hold the socket button until the indicator light flashes twice and stops once, release it, and then connect to the app
✅ ✅ The remote control needs to be paired with the socket in the following way before it can be used:
✅Remote control control, no WiFi required, it is RF2.4G control.
✅2.4G remote Off line pairing:
When in non pairing mode, quickly and continuously press the button 2 times on the socket, At this time, the indicator light flashes twice and stops once.，the socket will enter pairing mode. At this time, press the switch remote control once, and if the socket is controlled, pairing is successful; (If pairing is not successful, please repeat the above operation)
✅Attention: If the indicator light flashes slowly or rapidly, it indicates that the pairing has entered invalid pairing mode and cannot be successfully paired. You need to clear the pairing code of the socket and then perform the pairing operation again. （The indicator light must flash twice and stop once before pairing can be successful）
✅Clear pairing:
When in non pairing mode, continuously press the button on the socket 8 times (within 5 seconds) to turn off the indicator light and clear the successful pairing.
🔹 eWeLink APP Remote Control
Control your devices from anywhere using the eWeLink app on iOS or Android. No hub required – works over 2.4GHz WiFi.
🔹 Voice Control with Alexa & Google Home speaker
Hands-free operation: "Alexa, turn on the heater" or "Hey Google, turn off the fan." Works seamlessly with Alexa and Google Assistant.
🔹 Timer & Countdown Functions
Set schedules for your appliances – automatically turn on/off at specific times. Use countdown mode to power off after a set duration, saving energy and adding convenience.
🔹 Sharing function: Share devices with family through the app
🔹 RF 2.4GHz Remote Compatible(Can be used without WiFi,only serves the purpose of powering off and on, for example: cannot adjust the wind speed and shaking state of the fan)
Pair with an optional RF 2.4GHz remote for physical control. Ideal for family members who prefer a simple button press.
Note: it Without metering function, and it dose not support RF 433mhz frequency.
AliExpress Shopper –
The product is very good.